Need help?Do you have a question about the Integra DTC-9.8 and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Audio Channels | 7.1 |
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| HDMI Version | 1.3a |
| Video Upscaling | Yes |
| THX Certified | Yes |
| Multi-Zone | Yes |
| Supported Video Resolutions | 1080p |
| Video Processing | Faroudja DCDi |
| Audio Decoding | Dolby TrueHD, DTS-HD Master Audio |
| Audio Formats Supported | Dolby Digital, DTS |
| DAC | 24-bit/192kHz |
| Networking | Ethernet |
| Type | AV Preamp/Processor |
Conditions that necessitate professional servicing to maintain safety and functionality.
Diagram and explanation of all input and output terminals on the AV controller's rear panel.
Guidance on connecting speakers, including speaker configuration and using dipole speakers.
Step-by-step instructions for connecting a TV or projector, covering video and audio connections.
Steps for powering the AV controller on and off using the unit or remote control.
Guide to configuring initial speaker settings, including type and bi-amping options.
Detailed guide for using the Audyssey MultEQ XT system to automatically optimize speaker settings.
Configuration for HDMI output settings to match TV capabilities and display menus correctly.
Procedure for assigning HDMI input sources to input selectors and configuring video upconversion.
Guide for assigning component video inputs to source selectors and enabling upconversion.
Instructions for manually adjusting speaker settings if automatic setup results are unsatisfactory.
Temporarily adjusting the volume level for individual speakers for optimal listening balance.
Overview of how to select various listening modes (Stereo, Surround, Direct, THX) for different audio sources.
Accessing and adjusting audio settings like tone controls, multiplex, and speaker levels for personalized sound.
Guide to speaker setup options, including speaker configuration and manual adjustment of settings.
Specifying the distance from each speaker to the listening position for accurate sound staging.
Adjusting individual speaker levels using test tones to achieve a balanced listening volume.
Manually adjusting speaker tone with a 15-band equalizer for customized sound profiles.
Individually configuring settings for each input selector, including satellite radio and name editing.
HDMI settings, including audio output, lip sync, xvYCC, and control features for connected devices.
Troubleshooting steps for audio issues, including checking connections, settings, and muting.
Steps to diagnose and resolve issues where no video signal is displayed on the TV or projector.
Troubleshooting steps for common remote controller problems, including battery, range, mode, and code issues.
To Next Page
