Need help?Do you have a question about the Integra DHC-80.2 and is the answer not in the manual?
General| Audio Channels | 9.2 |
|---|---|
| HDMI Outputs | 2 |
| Room Calibration | Audyssey MultEQ XT32 |
| Weight | 18.3 kg (40.3 lbs) |
| 4K Passthrough | Yes |
| 3D Support | Yes |
| Frequency Response | 10 Hz - 100 kHz |
| Signal-to-Noise Ratio | 110 dB |
| HDMI Inputs | 8 |
| Network Connectivity | Ethernet |
| Supported Audio Formats | Dolby TrueHD, DTS-HD Master Audio |
| Video Upscaling | Yes |
| USB | 1 |
| Dimensions | 435 x 190 x 440 mm |
| THD | 0.08% (at rated power) |
Instructions for when to unplug the apparatus and refer servicing to qualified personnel.
Precautions against inserting objects into openings or placing liquids on the unit.
Instructions on how to use the remote to control the AV controller itself.
Step-by-step guide to powering on the AV controller.
Step-by-step guide to powering off the AV controller to standby mode.
How to use Activities buttons to execute pre-programmed remote control sequences.
Guide to automatically determining speaker settings and optimizing room acoustics.
How to select desired listening modes (Movie/TV, Music, Game, THX).
Introduction to the on-screen setup menus for changing AV controller settings.
Explains how to navigate and use the on-screen setup menus.
General steps for navigating and changing settings within the setup menu.
How to assign input sources to specific jacks and configure output settings like Monitor Out.
How to configure the Monitor Out setting for video signal output.
How to assign component video inputs to input selectors and configure output.
How to assign digital audio inputs (Coaxial, Optical) to input selectors.
How to assign HDMI inputs to input selectors and configure default assignments.
How to assign analog and multichannel audio inputs to input selectors.
How to configure speaker types (Normal, Bi-Amp) and front high/wide settings.
How to specify connected speakers and set crossover frequencies for each.
How to set speaker distances from the listening position for proper sound arrival.
How to manually adjust the tone of speakers using a 15-band equalizer.
How to adjust speaker levels using test tones for balanced output.
How to configure THX-specific audio settings like speaker spacing and loudness.
Access to various sound adjustment functions from the Home menu.
How Audyssey Dynamic EQ maintains sound quality at low volume levels.
How Dynamic Volume adjusts for volume variations between programs and commercials.
How to select picture modes (Custom, ISF Day/Night, Cinema, Game, Through) for optimal display.
How to specify output resolution for HDMI and upconvert picture resolution.
How to enable CEC control for HDMI-connected components.
How to enable the ARC function to send audio from TV to AV controller.
How to update the AV controller's firmware via network or USB.
How to manually adjust the volume level of each speaker.
Reference to Audyssey Dynamic EQ and Dynamic Volume settings.
How to use the vTuner service to search and play Internet radio stations and podcasts.
How to play music files from a computer or media server via the network.
How to manually configure network settings if DHCP is disabled.
How to play music files stored on a USB mass storage device.
How to control Zone 2/3 functions using the remote controller.
How to configure multi-zone settings, including Zone 2/3 output and volume limits.
How to turn Zone 2/3 on/off and select input sources.
How to connect an iPod/iPhone directly to the AV controller's USB port.
How to play music files stored on an iPod/iPhone.
How to connect an Onkyo Dock for iPod control and playback.
Information specific to the UP-A1 Dock for iPod playback, power on, and charging.
Information on connecting and controlling an iPod using the RI Dock.
Lists preprogrammed remote control codes for various components.
How to find and enter remote control codes using the on-screen setup menu.
Lists remote control codes for Integra/Onkyo components connected via 'u'.
How to program sequences of remote control actions into Activities buttons.
Troubleshooting steps for power-related issues like no sound or flashing standby indicator.
Troubleshooting steps for audio issues like no sound or quiet output.
Troubleshooting steps for issues with no picture output or distorted video.
How to update firmware using a wired network connection.
How to update firmware using a USB storage device.
Step-by-step guide for updating firmware via network.
To Next Page
