Need help?Do you have a question about the Integra DHC-40.2 and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Channels | 7.2 |
| HDMI Inputs | 8 |
| HDMI Outputs | 2 |
| Network Connectivity | Ethernet, Wi-Fi |
| Zone Outputs | 2 |
| THX Certified | No |
| Frequency Response | 10 Hz - 100 kHz |
| Input Sensitivity/Impedance | 200 mV / 47 kΩ |
| Audio Formats Supported | Dolby Atmos, Dolby TrueHD, DTS:X, DTS-HD Master Audio |
| Streaming Services | Spotify, Tidal, Pandora, SiriusXM |
| THD | 0.08% |
| Signal-to-Noise Ratio | 110dB |
| Audio Inputs/Outputs | Phono |
| Supported Video Formats | 4K, HDR, Dolby Vision |
| Power Output (8 ohms) | N/A (Pre-amplifier) |
| Power Output (6 ohms) | N/A (Pre-amplifier) |
Regulatory compliance information for US users regarding FCC rules.
Regulatory compliance information for Canadian users regarding ICES-003.
Details the advanced audio and video processing capabilities of the unit.
Lists the various input and output ports available on the unit.
Covers additional features like presets, room correction, and sync control.
Explains how to use the remote to operate the AV controller.
Details how to control the built-in radio tuner using the remote.
Explains speaker setup for optimal home theater immersion.
Guide to connecting speakers to the AV controller and amplifier.
Instructions for connecting devices using HDMI cables.
Steps for connecting FM and AM antennas for radio reception.
Instructions for connecting the unit to a power source.
Discusses various video connection options and signal flow.
Step-by-step guide to powering the unit on and off.
How to select and play audio/video from connected sources.
Overview of the on-screen setup interface and categories.
General steps for navigating and making settings in the setup menu.
Configures video output options for HDMI and component outputs.
Specifies the output resolution for HDMI and component video.
Defines connected speakers and their crossover frequencies.
Sets the distance of each speaker from the listening position.
Adjusts individual speaker volume levels for balanced sound.
Allows manual tuning of speaker tone with a 15-band equalizer.
Configures THX-specific audio settings like spacing and loudness.
Covers Multiplex/Mono, Dolby, and DTS audio settings.
Adjusts subwoofer level and input-specific source settings.
Enhances sound quality at low volumes based on room acoustics.
Adjusts input levels and corrects audio-video sync issues.
General guide to adjusting picture quality and reducing noise.
Optimizes picture for gaming and sets aspect ratio.
Assigns default listening modes for various input signal types.
Includes volume display, muting, max volume, and headphone level.
Configures on-screen display behavior and menu language.
Configures Remote ID, Tuner, SIRIUS, and HDMI settings.
Details requirements for connecting to a home network.
How to access and play stations via the vTuner service.
Guide to playing music files directly from USB storage devices.
Setup for audio and video playback in a second room.
Configures Zone 2 output, volume limits, and power-on settings.
How to select sources and control Zone 2 playback.
Lists pre-set codes for controlling various components.
How to find and test remote control codes for components.
Step-by-step guide to inputting remote control codes.
How to teach the remote to learn commands from other remotes.
Programming sequences of actions for single-button execution.
Solutions for issues with power, sound, and volume.
Troubleshooting steps for video display and remote control issues.
To Next Page
