Integra DHC-40.2 - Basic AV Controller Operations; Turning On;Off the AV Controller

23
En
Turning On/Off the AV Controller
Turning On
Press On/Standby on the front panel.
or
Press Receiver followed by On on the remote controller.
The AV controller comes on, the display lights, and the Standby indicator goes off.
Pressing the remote controller’s On again will turn on any components connected via u.
Turning Off
Press On/Standby on the front panel.
or
Press Receiver followed by Standby on the remote controller.
The AV controller will enter Standby mode. To prevent any loud surprises when you turn on the AV controller,
always turn down the volume before you turn it off.
Standby indicator
On/Standby
Standby
On
Receiver
Remote controllerFront panel