Need help?Do you have a question about the Integra DHC-80.3 and is the answer not in the manual?
General| Brand | Integra |
|---|---|
| Model | DHC-80.3 |
| Category | Controller |
| Language | English |
Warning about exposing the apparatus to rain or moisture.
Caution to not remove the cover and refer servicing to qualified personnel.
Explains how to use the remote to control the AV controller itself.
Instructions for connecting speakers via PRE OUT to a power amplifier.
Details on using RCA cables to connect to a power amplifier.
Details on using XLR cables to connect to a power amplifier.
How to connect subwoofers using RCA jacks.
How to connect subwoofers using XLR jacks.
General advice before making AV connections.
Explains connecting various components to front and rear jacks.
Steps to connect the power cord and plug into the wall outlet.
Steps to power on the AV controller.
Steps to power off the AV controller.
Steps to play audio/video from connected components.
Instructions for playing music files from a USB device.
How to use the built-in tuner for AM/FM stations.
How to use the microphone for automatic speaker calibration.
How to manually adjust speaker settings.
How to select different sound modes for playback.
Optimizes soundtracks for home theater, music, and games.
Adjust audio settings like sound program, bass, treble, volume, EQ.
Program Activities for sequences of remote control actions.
Overview of the setup menu categories.
General steps for navigating and making settings in the setup menu.
Select output destination for video sources.
Set output resolution for HDMI and Component Video outputs.
How to assign HDMI inputs to input selectors for proper component control.
Assign component video inputs to input selectors.
Assign digital audio inputs to input selectors.
Assign multichannel analog inputs to input selectors.
Set front speaker type to Normal or Bi-Amp.
Configure front high/wide speakers for enhanced sound.
Review or manually set speaker configuration after Audyssey.
Configure subwoofer connection (1ch/2ch/No).
Set front speaker frequency response (Full Band or crossover).
Configure center, surround, surround back speaker response.
Configure front wide/high speaker response.
Specify surround back channel configuration (1ch/2ch).
Specify distance for each speaker.
Adjust speaker levels using test tones.
Manually adjust equalizer for each speaker with a 15-band EQ.
THX specific settings like Subwoofer, BGC, Loudness Plus.
Settings for Dolby Pro Logic IIx, IIz Height, EX, Digital, Plus, TrueHD.
Automatically adjusts volume levels for consistent listening.
Pre-register settings for different content types.
Set Audyssey modes (Off, Movie, Music) for speaker correction.
Automatically adjust volume for consistent program experience.
Set aspect ratio for video sources.
Select preset picture modes or custom settings.
Configure Zone 2/3 audio and video outputs.
Enable/disable HDMI system control for connected components.
Send TV tuner audio to HDMI OUT MAIN via ARC.
Configure network settings like DHCP, IP Address, DNS.
Look up remote control codes for components.
Adjust volume of each speaker while listening.
Activate Audyssey modes for speaker correction.
Use Dynamic EQ for sound quality at any volume.
Adjust volume for consistent program experience.
Setup for playing audio in multiple rooms.
Connect speakers in Zone 2/3 to separate amplifiers.
Turn zones on/off and select input sources.
Control zones using the remote controller.
Adjust volume for Zone 2/3.
Information on Onkyo docks and compatibility.
Details about the UP-A1 Dock for iPod/iPhone.
How to control iPod/iPhone using the AV controller's remote.
Lists components with preprogrammed codes.
Steps to find remote control codes via setup menu.
Steps to enter remote control codes for components.
Learn commands from other remote controllers.
Program Activities for sequences of remote control actions.
Solutions for power-on and unexpected power-off issues.
Troubleshooting steps for no or low audio output.
Steps to troubleshoot a non-functional remote controller.
Instructions for updating firmware via a wired internet connection.
Instructions for updating firmware using a USB device.
Preparatory steps before starting firmware update.
Step-by-step guide for firmware update.
Error codes and descriptions for network update failures.
Error codes and descriptions for USB update failures.
Explains different video connection types.
Video signal flow when Monitor Out is set to HDMI.
Video signal flow when Monitor Out is set to Both options.
Video signal flow when Monitor Out is set to Analog.
Lists components compatible with RIHD.
Outlines linked operations for RIHD-compatible devices.
Linked operations with RIHD-compatible TVs.
Linked operations with RIHD-compatible players/recorders.
Connect AV controller HDMI OUT to TV HDMI input.
Connect TV audio to AV controller via optical cable.
Connect player HDMI output to AV controller HDMI IN.
Configure HDMI settings like RIHD and ARC.
Verify connections and settings after setup.
How to use the remote controller for linked operations.
Diagram showing how to connect AV controller to home network.
Requirements for Ethernet network and router.
To Next Page
