25
En
Turning On & Basic Operations
Turning On/Off the AV Controller
Tip
• For details on power management settings, see “Auto Standby” (➔ page 68).
Turning On
1
Press 8On/Standby on the front panel.
or
Press Receiver followed by 8Receiver on the remote controller.
The AV controller comes on, the display lights.
Turning Off
1
Press 8On/Standby on the front panel.
or
Press Receiver followed by 8Receiver on the remote controller.
The AV controller will enter standby mode. To prevent any loud surprises when you turn on the AV controller,
always turn down the volume before you turn it off.
8On/Standby
8Receiver
Receiver
To Next Page
Loading...
