Integra DHC-80.3 User Manual

15
En
Using Powered Subwoofers
■ Connection via RCA Jacks
You can connect the powered subwoofers to SW1 PRE OUT
and SW2 PRE OUT respectively.
The level and distance can be set individually for each output.
If you’re using only one subwoofer, connect it to SW1 PRE
OUT.
■ Connection visa XLR Jacks
You can also connect the powered subwoofers to
SUBWOOFER 1 PRE OUT and SUBWOOFER 2 PRE
OUT respectively, by using balanced XLR cables.
The level and distance can be set individually for each output.
If you’re using only one subwoofer, connect it to
SUBWOOFER 1 PRE OUT.
To find the best position for your subwoofers while playing a
movie or some music with good bass, experiment by placing
your subwoofers at various positions within the room, and
choose the one that provides the most satisfying results.
Tip
• If your subwoofer is unpowered and you’re using an external
amplifier, connect the subwoofer pre out jack to an input on the
amplifier.
LINE INPUT
LINE INPUT
LINE INPUT
LINE INPUT
Powered subwoofers
INPUT
INPUT
INPUT
INPUT
Powered subwoofers
Balanced XLR cable
Balanced XLR cable
Corner
position
1/3 of wall
position

Integra DHC-80.3 Specifications

General

Brand	Integra
Model	DHC-80.3
Category	Controller
Language	English