Integra DTC-9.8 User Manual

46
First Time Setup
This section explains the settings that you need to make before using the AV controller for the very first time.
If you’ve fed your front speakers from the FRONT L/R
and SURR BACK L/R outputs for bi-amping, you must
change the Speaker Type setting. For hookup informa-
tion, see “Bi-amping the Front Speakers” on page 25.
Notes:
• When bi-amping is used, the AV controller is able to
feed up to 5.1 speakers in the main room.
• Before you change these settings, turn down the vol-
ume.
Note:
• This procedure can also be performed on the AV con-
troller by using its [Setup], [Enter], and arrow buttons.
Speaker Settings
The onscreen menus shown in this manual may be
slightly different from what you see on your TV.
1
Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ]
buttons to select “2. Speaker
Setup,” and then press [Enter].
The Speaker Setup menu appears.
-
TV CH
TV VOL
--
/
---
10 11 12
D.TUN
+10
0
Clear
456
789
Input Selector
Tape
Tuner
CD
Phono
Game / TV
Macro
12
3
VCRDVD
CDR/MD
CD
Zone 2
Remote Mode
Dimmer
Tape/AMP
Sleep
Receiver TV Dock Cable
VOL
CH
Disc
Album
+
-
Enter
T
o
p
M
e
n
u
M
e
n
u
Display Muting
E
x
i
t
G
u
i
d
e
Prev
CH
R
e
t
u
r
n
S
e
t
u
p
Playlist
RandomRec
SAT
Zone 3
AUX 1 AUX 2
2, 3
2–5
1
1, 6
If you change these settings, you must run the auto-
matic speaker setup again (see page 54).
Receiver
S
e
t
u
p
Enter
Enter
3
Use the Up and Down [ ]/[ ]
buttons to select “1. Speaker Set-
tings,” and then press [Enter].
The Speaker Settings menu appears.
4
Use the Up and Down [ ]/[ ]
buttons to select “Speaker Type,”
and use the Left and Right
[ ]/[ ] buttons to select:
Normal: Select this if you’ve con-
nected your front speakers
normally.
Bi-Amp: Select this if you’ve con-
nected your front speakers for
bi-amped operation.
5
Press the [Setup] button.
Setup closes.
Enter
Enter
2-1.Speaker Settings
Speakers Type Normal
Enter
S
e
t
u
p
DTC-9.8En.book Page 46 Friday, February 15, 2008 1:23 PM

Integra DTC-9.8 Specifications

General

Brand	Integra
Model	DTC-9.8
Category	Controller
Language	English