17
Remote Controller
L Tone buttons: Adjusts the sound quality. Press
"Treble", "Bass", or "Vocal" to select what you
want to adjust, then adjust with + and -.
Treble/Bass button: You can adjust the sound
quality of the speakers.
1.Press Treble or Bass to select the content to
adjust.
Treble: Enhances or moderates the high-tone
range of the speakers.
Bass: Enhances or moderates the low-tone
range of the speakers.
2. Press + or - to adjust.
Vocal button: Emphasizes movie dialogues
and music vocals to listen to them more easily.
It is effective to movie lines in particular. Also, it
exerts the effect even if the center speaker is not
used. Select a desired level from "1" (low) to "5"
(high).
1. Press Vocal.
2. Press + or - to adjust.
• Depending on the input source or listening
mode setting, selection is not possible, or the
desired effect may not be achieved.
M Listening Mode buttons: Selects a listening
mode ( →p81, p181).
N Dimmer button: Switches the brightness of the
display with three levels. It cannot be turned off
completely.
O Zone 2/Zone 3 Shift button: Used to control the
multi-zone function ( →p99).
P VOLUME buttons
Q Clear button: Deletes all characters you have
entered when entering text on the TV screen.
R Memory button: Used to register AM/FM radio
stations. ( →p80)
S Mode button: Switches between automatic
tuning and manual tuning for AM/FM stations
( →p77). Also, when an HDMI CEC function-
enabled AV component is connected to this unit,
you can switch "3. Play buttons" between "CEC
MODE" and "RCV MODE" (normal mode).
To Next Page
Loading...
Need help?
General
