149
SetupSetup
7. Multi Zone7. Multi Zone
1. Zone 2
Change the settings for Zone 2.
Output Level (Default Value: Fixed)
Select whether to adjust the volume on the integrated amplier in the separate
room or on this unit when outputting to the separate room (Zone 2).
Fixed Adjust on the integrated amplier in the separate room
Variable Adjust on this unit
Maximum Volume (Default Value: Off)
Set the maximum value for Zone 2 to avoid too high volume. Select a value
from "Off", "50" to "99". (When "3. Audio Adjust" - "Volume" - "Volume Display"
is set to "Absolute")
Power On Volume (Default Value: Last)
Set the Zone 2 volume level of when this unit is turned on. Select a value
from "Last" (Volume level when the unit was turned off), "Min", "0.5" to "99.5"
and "Max". (When "3. Audio Adjust" - "Volume" - "Volume Display" is set to
"Absolute")
• You cannot set a higher value than that of "Maximum Volume".
Sound Check (Default Value: -)
Output test tones to ZONE 2 to enjoy audio in a separate room (ZONE 2) in
addition to the main room.
Press Enter while "Start" is being displayed. Operate by following the on-
screen displays.
2. Zone 3
Change the settings for Zone 3.
Output Level (Default Value: Fixed)
Select whether to adjust the volume on the integrated amplier in the separate
room or on this unit when outputting to the separate room (Zone 3).
Fixed Adjust on the integrated amplier in the separate room
Variable Adjust on this unit
Maximum Volume (Default Value: Off)
Set the maximum value for Zone 3 to avoid too high volume. Select a value
from "Off", "50" to "99". (When "3. Audio Adjust" - "Volume" - "Volume Display"
is set to "Absolute")
Power On Volume (Default Value: Last)
Set the Zone 3 volume level of when this unit is turned on. Select a value
from "Last" (Volume level when the unit was turned off), "Min", "0.5" to "99.5"
and "Max". (When "3. Audio Adjust" - "Volume" - "Volume Display" is set to
"Absolute")
• You cannot set a higher value than that of "Maximum Volume".
To Next Page
Loading...
Need help?
General
