EasyManuals Logo

Integra DRX-5 Basic Manual

Integra DRX-5
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
11
|
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting Appendix
3� Distance
Set the distance from each speaker to the listening position.
Setting Item Default Value Setting Details
Front Left 12.0ft/3.60m Specify the distance between each speaker and
the listening position.
Center 12.0ft/3.60m Specify the distance between each speaker and
the listening position.
Front Right 12.0ft/3.60m Specify the distance between each speaker and
the listening position.
Height Left 9.0ft/2.70m Specify the distance between each speaker and
the listening position.
The setting cannot be changed if anything
other than "No" is set in "Configuration" - "Zone
Speaker" and Zone 2 is on.
Height Right 9.0ft/2.70m Specify the distance between each speaker and
the listening position.
The setting cannot be changed if anything
other than "No" is set in "Configuration" - "Zone
Speaker" and Zone 2 is on.
Surround Right 7.0ft/2.10m Specify the distance between each speaker and
the listening position.
Surr Back Right 7.0ft/2.10m Specify the distance between each speaker and
the listening position.
The setting cannot be changed if anything
other than "No" is set in "Configuration" - "Zone
Speaker" and Zone 2 is on.
Surr Back Left 7.0ft/2.10m Specify the distance between each speaker and
the listening position.
The setting cannot be changed if anything
other than "No" is set in "Configuration" - "Zone
Speaker" and Zone 2 is on.
Surround Left 7.0ft/2.10m Specify the distance between each speaker and
the listening position.
Subwoofer 12.0ft/3.60m Specify the distance between each speaker and
the listening position.
Default values vary depending on the regions.
Distance units can be switched by pressing Mode on the remote controller. When the unit is set as
feet, you can set between 0.1 ft and 30.0 ft in increments of 0.1ft. When the unit is set as meters, you
can set between 0.03 m and 9.00 m in increments of 0.03 m.
4� Level Calibration
Setting Item Default Value Setting Details
Front Left 0.0 dB Select a value between "12.0 dB" and "12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Center 0.0 dB Select a value between "12.0 dB" and "12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Front Right 0.0 dB Select a value between "12.0 dB" and "12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Height Left 0.0 dB Select a value between "12.0 dB" and "12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
The setting cannot be changed if anything
other than "No" is set in "Configuration" - "Zone
Speaker" and Zone 2 is on.
Height Right 0.0 dB Select a value between "12.0 dB" and "12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
The setting cannot be changed if anything
other than "No" is set in "Configuration" - "Zone
Speaker" and Zone 2 is on.
Surround Right 0.0 dB Select a value between "12.0 dB" and "12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.

Other manuals for Integra DRX-5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Integra DRX-5 and is the answer not in the manual?

Integra DRX-5 Specifications

General IconGeneral
BrandIntegra
ModelDRX-5
CategoryReceiver
LanguageEnglish

Related product manuals