Integra DRX-5 Basic Manual

17
|
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting Appendix
5� Listening Mode Preset
You can preset your favorite listening mode to each input. (For example, you can always
apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play it in unchanged
sound field.)
When the list of input sources is displayed, set the signal type and listening mode.
Although it is possible to select the listening mode during playback, the selected mode will
be reset when the unit enters standby mode.
Setting Item Default Value Setting Details
Analog/PCM All Ch Stereo Set the listening mode for playing PCM signals of
CD and analog signals of record and cassette tape.
Dolby Dolby Surround Set the listening mode for playing Dolby Digital,
Dolby Digital Plus and Dolby TrueHD signals.
•
Input signals are played as they are input if you
select "Straight Decode".
DTS
DTS Neural:X
(before updating
to a version that
supports DTS:X
audio:
Straight
Decode
)
Set the listening mode for playing digital audio
signals in DTS and DTS-HD High Resolution
formats. Select the listening mode specified for
Blu-ray or such other DTS-HD Master Audio
source.
•
Input signals are played as they are input if you
select "Straight Decode".
Other Dolby Surround Set the listening mode for playing audio such as
DVD-audio and DSD signals.
•
Input signals are played as they are input if you
select "Straight Decode".
•
Available listening modes vary depending on speaker configuration and the input signal.
•
Setting "Last Valid" will always select the last selected mode.
•
Only "Analog" can be set to the "TUNER" input.
•
"Digital", "Dolby" and "DSD" can be set to the "NET" input.
6� Hardware
Make settings related to the HDMI CEC, HDMI Standby Through, ARC features, settings
related to network features, and settings related to power management of the unit, such as
Auto Standby and Network Standby.
■ 1� HDMI
Setting Item Default Value Setting Details
HDMI CEC Off Setting to "On" enables the input selection link and
other link functions with HDMI connected CEC
compliant device.
"On": Use this function
"Off": Do not use this function
When changing this setting, turn off and then on
again the power of all connected components.
•
Depending on the TV set, a link may need to be
configured on the TV.
•
This function is effective only when the device is
connected to the HDMI OUT MAIN terminal.
•
Setting to "On" and closing the on-screen menu
displays the name of the CEC-compatible
components and "CEC On" on the display.
•
Power consumption in standby mode may
increase if "On" is set. (Depending on the TV
status, the unit will enter the normal standby
mode.)
•
If you operate the Master Volume dial on the
main unit when this setting is "On" and audio
is output from the TV speakers, audio will be
output also from the speakers connected to the
unit. If you want to output from only either of
them, change the unit or TV settings, or reduce
the volume of the unit.
•
If abnormal operation occurs when you set the
setting to "On", set it to "Off".
•
When connecting a non-CEC compatible
component, or when you are not sure whether it
is compatible, set the setting to "Off".

Integra DRX-5 Specifications

General

Brand	Integra
Model	DRX-5
Category	Receiver
Language	English