Integra DTR-40.6 - Page 45

Advanced Settings
45
Setting Item Default Value Setting Details
PHONO Zone2 Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone2/Zone3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"All": Will be output when selected as input
source of main room, Zone 2 or Zone 3
playback
TUNER Zone2 Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone2/Zone3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"All": Will be output when selected as input
source of main room, Zone 2 or Zone 3
playback
Setting Item Default Value Setting Details
NET Zone2 Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone2/Zone3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"All": Will be output when selected as input
source of main room, Zone 2 or Zone 3
playback
USB Zone2 Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone2/Zone3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"All": Will be output when selected as input
source of main room, Zone 2 or Zone 3
playback