To Next PageTo Next Page
Need help?Do you have a question about the Integra DTR-5.2 and is the answer not in the manual?
General| HDMI Inputs | 6 |
|---|---|
| HDMI Outputs | 1 |
| THD | 0.08% |
| Input Sensitivity | 200 mV (line) |
| Signal to Noise Ratio | 100 dB |
| Speaker Impedance | 4-16 ohms |
| Digital Inputs | 2 Optical, 1 Coaxial |
| Total Harmonic Distortion | 0.08% |
| Audio Formats Supported | Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS |
| Video Formats Supported | 1080p |
| Network Connectivity | Ethernet, Wi-Fi |
| Video Inputs | Composite, Component |
| Video Outputs | Composite |
| Dimensions | 17.1 x 14.3 x 6.5 inches |
| Frequency Response | 10Hz to 100kHz |
| Audio Inputs | 6 |
Highlights the main technical specifications and capabilities of the AV receiver.
Explanation of the physical buttons and dials on the DTR-5.2's front panel.
Important notes and precautions for making all connections securely.
Detailed steps for connecting turntables, CD players, and tape decks.
Instructions for connecting DVD players and VCRs to the unit.
Recommendations for optimal speaker placement for surround sound.
How to check speaker impedance and set the impedance selector switch.
Steps for connecting the power cord and placing the unit in standby mode.
How to configure speaker size and presence for optimal sound.
Setting speaker distances for accurate sound staging and calibration.
Adjusting individual speaker volume levels for balanced sound output.
How to choose different sound modes for music and video playback.
Switching between AUTO, MULTICH, and ANALOG audio modes.
How to play back audio from multichannel sources.
Description of various listening modes like Stereo, Direct, and Surround.
Setting up digital input and multichannel options for each source.
Customizing listening modes for different input sources and signal types.
Assigning specific listening modes to input sources based on signal type.
Setting maximum volume, power-on volume, and late night function.
Introduction to the remote controller's capabilities and basic usage.
Instructions for programming remote codes for other brands using lookup numbers.
Step-by-step guide to learning commands from other remote controllers.
Explanation of programming sequences of operations into a single button.
Step-by-step guide to creating macro functions.
Programming a single macro directly into the DIRECT MACRO button.
Procedure to erase all programmed commands and macros, restoring factory settings.
Solutions for power-related problems like shut-off or no power.
Troubleshooting common speaker and audio output problems.
Troubleshooting no sound, incorrect video, or recalled station issues.
Addressing issues with remote controller operation and specific functions.
