Integra Luxtec 9300XSP - General Warnings; Precautions

Integra
®
Luxtec
®
9300XSP 300 Wa Xenon Light Source
4
•SAFETY PRECAUTIONS MUST ALWAYS BE EXERCISED WHEN
USING ELECTRICAL EQUIPMENT TO PREVENT OPERATOR/
PATIENT SHOCK, FIRE HAZARD OR EQUIPMENT DAMAGE.
•This Manual contains information about the proper
procedures for inspecting and preparing this product before
its use, and care and storage aer use.
•Follow the instructions and restrictions in the operating
manuals of other manufacturer’s equipment when they are
used in conjunction with this product.
•Before every procedure, carefully inspect the Light Source to
ensure it has been properly maintained and cleaned, and that
it is fully functional. DO NOT use if inspection reveals any
damage such as cable cuts or loose connectors.
•To reduce the risk of fire and electric shock, do not expose
electrical equipment to moisture. When cleaning, do not
immerse any electrical device in liquid.
•All electrical equipment must be used with approved hospital
grade power cords and power plugs inserted properly into
grounded AC power outlets. If replacement is necessary
replace only with approved power cord.
•Do not use or store liquids on or above the light source.
•This product must be removed from the surgical field prior to
the use of a defibrillator.
•The Light Source should never be used in ocular surgery or in
a surgical procedure requiring direct illumination of the eye.
•The Light Source produces high intensity light. Thermal
burns can be the result of improper use of the Light Source
or the light output of the light guide cable.
•Do not position the equipment so that it is difficult to
remove the power plug.
Precautions
•Use only fiber optic light guide cables with the correct
proximal fiing for your turret and approved and tested for
compatibility with high intensity Xenon lamps of 300W or
higher.
•To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
•No modification of this equipment is allowed. Other than
parts described in this manual, this product has no user
serviceable parts. Do not remove the cover or aempt to do
any repairs yourself.
•Take precautions not to touch or disconnect the cable end
fiing from the turret until the Light Source has been “shut
down” for a period of time and allowed to cool. The cable
end fiing will remain hot immediately following shut down,
which can cause burns.
•
Take precautions to not place and rest a hot cable end fiing
on a patient or allow the system to come in contact with
unprotected hands or tissue. The entire system should be
allowed to cool following use. Failure to do so can cause
burns and/or tissue damage.
General Warnings
The user of this Integra product should be thoroughly familiar and trained in the assembly, use and care of this product.
The user should carefully study the Operation and Service Manual before making any aempt to use the equipment in the
clinical environment. Instructions should be followed specifically, with special aention given to warnings, controls and user
specifications. The Manual should also be available to the appropriate personnel.