Product Description
11
Table 1. Feature Summary (continued)
Hardware Monitor
Subsystem
• Hardware monitoring and fan control ASIC
• Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Three fan connectors
• Three fan sense inputs used to monitor fan activity
• Fan speed control
1.1.2 Manufacturing Options
Table 2 describes the manufacturing options. Not every manufacturing option is available in all
marketing channels. Please contact your Intel representative to determine which manufacturing
options are available to you.
Table 2. Manufacturing Options
Auxiliary fan
connector
Additional fan connector for use in larger chassis
SATA RAID
Intel
®
82801GR I/O Controller Hub (ICH7-R) for RAID support (levels 0,1, 0+1, and 5)
on the SATA interface
SCSI Hard Drive
Activity LED
Connector
Allows add-in hard drive controllers (SCSI or other) to use the same LED as the
onboard IDE controller.
For information about Refer to
Available configurations for the board Section 1.2, page 15
To Next Page
Loading...
