EasyManuals Logo
Home>Intel>Motherboard>DH77KC

Intel DH77KC User Manual

Intel DH77KC
99 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
Intel Desktop Board DH77KC Technical Product Specification
40
3. During the next power on, a message will be displayed on the screen to notify the
user that the power supply voltage rails have deviated outside the current ATX
power supply specification and safe operating levels.
4. A message will be added to the BIOS Event Log for each event that takes place
until the BIOS Event Log is cleared.
1.11.2.13 +5 V Standby Power Indicator LED
The +5 V standby power indicator LED shows that power is still present even when the
computer appears to be off. Figure 7 shows the location of the standby power LED.
CAUTION
If AC power has been switched off and the standby power indicator is still lit,
disconnect the power cord before installing or removing any devices connected to the
board. Failure to do so could damage the board and any attached devices.
Figure 7. Location of the Standby Power LED

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel DH77KC and is the answer not in the manual?

Intel DH77KC Specifications

General IconGeneral
BrandIntel
ModelDH77KC
CategoryMotherboard
LanguageEnglish

Related product manuals