Intel Desktop Board DX79TO Technical Product Specification
16
1.2 Legacy Considerations
This board differs from other Intel Desktop Board products, with specific changes
including (but not limited to) the following:
• No parallel port connector
• No floppy drive connector
• No PS/2 connectors
1.3 Online Support
To find information about… Visit this World Wide Web site:
Intel Desktop Board DX79TO http://www.intel.com/products/motherboard/index.htm
Desktop Board Support http://www.intel.com/p/en_US/support?iid=hdr+support
Available configurations for the Intel
Desktop Board DX79TO
http://ark.intel.com
Supported processors http://processormatch.intel.com
Chipset information http://www.intel.com/products/desktop/chipsets/index.htm
BIOS and driver updates http://downloadcenter.intel.com
Tested memory http://www.intel.com/support/motherboards/desktop/sb/CS-
025414.htm
Integration information http://www.intel.com/support/go/buildit
1.4 Processor
The board is designed to support Intel Core i7 and Intel Xeon processors in an
LGA2011 socket
Other processors may be supported in the future. This board is designed to support
processors with a maximum wattage of 130 W with margin to allow for greater than
200 W operation. The processors listed above are only supported when falling within
the wattage requirements of the Intel Desktop Board DX79TO. See the Intel web site
listed below for the most up-to-date list of supported processors.
For information about… Refer to:
Supported processors http://processormatch.intel.com
CAUTION
Use only the processors listed on the web site above. Use of unsupported processors
can damage the board, the processor, and the power supply.
NOTE
This board has specific requirements for providing power to the processor. Refer to
Section 2.5.1 on page 58 for information on power supply requirements for this board.
To Next Page
Loading...
Need help?
General
