Product Description
25
Item Description
A Line in
B Line out/front speakers
C Mic in/side surround
Figure 4. Back Panel Audio Connectors
NOTE
The back panel audio line out connector is designed to power headphones or amplified
speakers only. Poor audio quality occurs if passive (non-amplified) speakers are
connected to this output.
For information about Refer to
The locations of the front panel audio header Figure 12, page 46
The signal names of the front panel audio header Section 2.2.2.1, page 48
The back panel audio connectors Section 2.2.1, page 44
To Next Page
Loading...
