9
Using the LCD
Navigating
The Management Module has four buttons and an LCD display,
which you can use to display information about your network or to
make changes to the module, hub, or stack.
Management Module
Main Menu:
Stats Config >
Reset
Esc
Esc - use to go back a level
Enter - use to accept selection
Arrow keys - use to move through selections
Reset button. See page 46.
The option currently
selected flashes on
the display.
If there are other items
in the menu, an arrow
(< >) appears on the
left or right side of the
display.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
