14
Accessing with Telnet
Telnet lets you access the Management Module in-band (over the
network).
To use Telnet:
1 Make sure an IP address is assigned to the Management Module.
See pages 11 or 19 for instructions.
2 Open a Telnet application. In Windows 95, select Run from the
Start Menu. Type:
telnet E
3 From the Terminal menu, select Preferences. Make sure the
emulation type is VT-100/ANSI and VT100 Arrows are enabled.
4 From the Connect menu, select Remote System. Enter the IP
address of the Management Module and click Connect.
5 Log into the Console Manager:
Enter username: [ ]
Enter password: [ ]
By default, no password or username is assigned. See page 45 to
assign them.
NOTE
Make sure you enable VT100
arrows in the Telnet applica-
tion you’re using.
If you don’t, you won’t be able
to use the arrow keys.
NOTE
If the screen doesn’t display cor-
rectly when connecting, press
q. This will refresh it.
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
