39
Wrong Polarity Cabling screen
Location
Top screen
5. Network health checks
<Check for wrong polarity cabling to devices>
Uses
Update interval:
Selects the time period between updates. For
example, an Update interval of 5 sec. means the Console Manager
will check the Management Module every five seconds to see if it
detected wrong polarity cabling.
<Scroll Down>/<Scroll Up>
Moves up or down the list of
wrong polarity cabling devices.
Hub:
Displays the hub number in the stack where the wrong polarity
device was found. The hub at the top of the stack is number one.
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
