12
Text: User-defined text set via SNMP through LANDesk Network
Manager or Device View for Web. Up to 32 characters can be
displayed on the LCD.
Address: The current IP address of the Management Module.
4 Choose Yes if you want the management module to sleep now or
No to return to the Config menu. Press
Disabling a port
1 From the Config menu, select Ports. Press
2 Use the arrow keys to select the hub (from 1 to 8). Press
3 Use the arrow keys to select the port number (from 1 to 12 or
1 to 24). Press
4 Select Enable or Disable using the arrow keys.
Press
5 Press any key to return to the Config menu.
Setting the serial port baud
1 From the Config menu, select RS232. Press
2 Use the arrow keys to change the baud (9600, 19200, or 38400).
Press to set.
3 Press any key to return to the Config menu.
Viewing trap messages
1 From the Main menu, select Traps. Press
2 Use the right arrow key to view the traps.
3 At the end of the list choose whether you want to clear the trap
list. Use the arrow keys to select Yes or No and press .
For a list of supported traps, see page 25.
Viewing About information
1 From the Main menu, select About. Press
2 Use the arrow keys to view the IP address, Subnet mask, MAC
address, Version (software version of Management Module), and
RS232 baud.
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
