21
Remote IP Configuration screen
Location
Top screen
1. System Configuration
<IP configuration>
<Configure IP remotely (BOOTP)>
Uses
Management Module MAC address:
Shows the unique
manufacturer-assigned hardware address. To use BOOTP, you must
enter this address into your BOOTP server.
BOOTP service:
Use
AS
or
z
to
change to enabled to
have the Management Module look for a BOOTP agent on a server to
obtain its IP address. You must first set up the BOOTP server.
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
