20
IP address:
The unique user-assigned network address for the
Management Module.
Subnet mask:
Should match the subnet mask of other devices on
your network.
Default gateway:
The IP address of the device that routes to
different networks. Typically a router or routing server.
New settings:
Use to assign a new IP configuration to the
Management Module.
• Choose <USE NOW> to reset the Management Module and use
the new local settings immediately. You’ll have to log in again if
you choose <USE NOW>.
• Choose <USE NEXT RESET> to save the new local settings. The
settings take effect when you reset the Management Module using
the menu item or front panel button.
• Choose <CANCEL> to clear the new settings and return to the
previous menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
