17
System Configuration screen
Location
Top screen
1. System Configuration
Uses
Name:
Assigns a name to the entire system (Management Module plus
all hubs in the stack). You can use up to 255 characters.
This sets the value for Name in the LCD sleep mode (see page 11). The
LCD displays only the first 16 characters.
Location:
Assigns a location to the entire system (Management
Module plus all hubs in the stack). You can use up to 255 characters.
This sets the value for Loc. in the LCD sleep mode (see page 11). The
LCD displays only the first 16 characters.
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
