26
Port Configuration screen
Location
Top screen
2. Port configuration
Uses
Hub:
Use
AS
or
z
to select the number of the hub in the
stack. The hub at the top of the stack is number one. The location of
the Management Module in the stack has no effect on hub
numbering.
Disable/enable port:
Use
AS
or
z
to select the hub
port. Press
E
on
<DISABLE/ENABLE>
to disable or enable the
port. Check the status column to see if the port is disabled or OK
(enabled).
Speed:
Displays the speed of the hub selected in the Hub: field.
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
