27
Port:
Displays the port number on the hub selected in the
Hub:
field.
Ports
13-Slot
and
14-Slot
on a 12-port hub refer to the two
expansion slots. If you’re facing the hub, the left slot is port 13 and
the right slot is port 14.
Amber (right)
Solid = Disabled
Blink = Wrong Speed
Intel Express
10/100 Stackable Hub
Change hub speed
Collision
Managed
Status
Power10BASE-T
100BASE-TX
Green (left)
Solid = Link
Blink = Activity
12345678 9 101112
Management Module
Main Menu:
Stats Config >
Reset
Esc
Status:
Displays the current functional state of the port. Possible
values are:
OK: The port is functioning normally.
disabled: The port was manually disabled (see Disable/
enable port). The port cannot establish a link with a device
again until it’s enabled.
partitioned: The port was automatically disabled by the hub
due to an error condition, such as 64 consecutive collisions. The
port will be automatically enabled when the condition clears.
wrong speed: The device attached to the hub is operating at 10
Mbps while the hub is operating at 100 Mbps, or vice-versa.
Link:
Indicates whether a device is properly connected to the port.
13-slot 14-slot
Download from Www.Somanuals.com. All Manuals Search And Download.
To Next Page
Loading...
