Intel G23557-002 User Manual

Intel Desktop Board DH61CR Technical Product Specification
58
2.7 Thermal Considerations
CAUTION
A chassis with a maximum internal ambient temperature of 38
o
C at the processor fan
inlet is required. Use of a processor heat sink that provides omni-directional airflow to
maintain required airflow across the processor voltage regulator area is highly
recommended. For a list of chassis that have been tested with Intel desktop boards
please refer to the following website:
http://www3.intel.com/cd/channel/reseller/asmo-na/eng/tech_reference/53211.htm
All responsibility for determining the adequacy of any thermal or system design
remains solely with the reader. Intel makes no warranties or representations that
merely following the instructions presented in this document will result in a system
with adequate thermal performance.
CAUTION
The ambient temperature must not exceed the board’s maximum operating
temperature. Failure to do so could cause components to exceed their maximum case
temperature and malfunction. For information about the maximum operating
temperature, see the environmental specifications in Section 2.9.
CAUTION
Ensure that proper airflow is maintained in the processor voltage regulator circuit.
Failure to do so may result in damage to the voltage regulator circuit.

Intel G23557-002 Specifications

General

Brand	Intel
Model	G23557-002
Category	Motherboard
Language	English