ACPI Sleep State
Use this item to select the highest ACPI sleep state the system will enter when the
suspend button is pressed.
The optional settings are: [Suspend Disabled]; [S3 (Suspend to RAM)].
Wake-up Function Settings
Press [Enter] to make settings for the following sub-items:
Wake-up System With Fixed Time
Use this item to enable or disable System wake on alarm event.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following items shall appear:
Wake-up Hour
Use this item to select 0-23. For example enter 3 for 3am and 15 for 3pm.
Wake-up Minute
Use this item to select 0-59.
Wake-up Second
Use this item to select 0-59.
Wake-up System with Dynamic Time
Use this item to enable or disable System wake on alarm event.
System will wake on the current time + Increase minute(s).
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will wake on the current time + increased
minute(s).
► PS2(S3~S5)/USB(S3/S4) Wake-up
Use this item to enable or disable PS2(S3~S5)/USB(S3/S4) wake-up from
S3/S4/S5.
The optional settings: [Disabled]; [Enabled].
*Note: This function is supported when ‘ERP Support’ is set as [Disabled].
USB S5 Power
Use this item to enable or disable USB power after power shutdown.
The optional settings: [Disabled]; [Enabled].
*Note: This function is supported when ‘ERP Support’ is set as [Disabled].
To Next Page
Loading...
