Media detect count
Use this item to set number of times presence of media will be checked.
Use either [+] / [-] or numeric keys to set the value.
► CSM Configuration
Press [Enter] to make settings for the following sub-items:
CSM Support
Use this item to enable or disable CSM Support
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
Option ROM execution
Network
Use this item to control the execution of Legacy PXE OpROM.
The optional settings: [Do not launch]; [Legacy].
Storage
Use this item to control the execution of UEFI and Legacy Storage OpROM.
The optional settings: [Do not launch]; [UEFI]; [Legacy].
Video
Use this item to control the execution of UEFI and Legacy Video OpROM.
The optional settings: [Do not launch]; [UEFI]; [Legacy].
Other PCI devices
Use this item to determine OpROM execution policy for devices other than
Network, Storage, or Video.
The optional settings: [Do not launch]; [UEFI]; [Legacy].
► USB Configuration
Press [Enter] to make settings for the following sub-items:
USB Configuration
Legacy USB Support
Use this item to enable or disable Legacy USB support.
The optional settings: [Enabled]; [Disabled]; [Auto].
[Enabled]: To enable legacy USB support.
[Disabled]: to keep USB devices available only for EFI applications,
[Auto]: To disable legacy support if no USB devices are connected.
To Next Page
Loading...
