Intel VS440FX - Page 54

VS440FX Motherboard Technical Product Specification
54
3.15.5.5 System Cache
Enables or disables both primary and secondary cache memory. The options are:
• Enabled (default)
• Disabled
3.15.5.6 Boot Speed
Sets the system’s boot speed. The options are:
• Deturbo (the motherboard operates at the speed of an AT system)
• Turbo (boot-up occurs at full speed) (default)
3.15.5.7 Num Lock
Sets the beginning state of the Num Lock feature on the numeric keypad of your keyboard. The
options are:
• Off (default)
• On
3.15.5.8 Speaker
Turns the onboard speaker control on or off. The options are:
• Disabled
• Enabled (default)
3.15.5.9 Setup Prompt
Controls whether the “Press <F1> Key if you want to run Setup” prompt is displayed during the
power-up sequence. The options are:
• Enabled (default)
• Disabled
✏
NOTE
The Setup Prompt option has no effect on your ability to access the Setup program. It only enables
or disables the prompt.
3.15.5.10 Hard Disk Pre-Delay
Sets the hard disk drive pre-delay. When enabled, this option causes the BIOS to wait the
specified time before it accesses the first hard drive. If your system contains a hard drive and you
don’t see the drive type displayed during boot-up, the hard drive may need more time before it is
able to communicate with the controller. Setting a pre-delay provides additional time for the hard
drive to initialize. The options are:
• Disabled (default)
• 3 seconds
• 6 seconds
• 9 seconds