126
Firmware Upgrade
Firmware upgrade is to update your FBB BDU with the latest rmware. Please refer
to your respective distributor for your rmware download.
Warning: DO NOT abort the upgrading process or unplug the power of the FBB BDU
during the rmware upgrade process at any time. Doing so will corrupt the existing
rmware loaded onto the FBB BDU.
Follow these steps to upgrade the rmware for your FBB BDU:
1. Download or acquire the new rmware from your respective distributor and save
it in your computer’s hard drive.
Note: Make sure the FBB BDU is switched on and connected to the desktop/
laptop computer using the LAN cable.
2. Select Firmware Upgrade.
Read the Disclaimer message carefully before proceeding with the Firmware
Upgrade.
3. Click Firmware Upgrade.
The FBB BDU will reboot into Safe mode.
Note: All LEDs will turn to amber colour and start blinking, which means it’s on Sate mode.
The FBB Web console will appear. Re-log in using the provided username and
password.
To Next Page
Loading...
