Need help?Do you have a question about the Intellian i4 Inland and is the answer not in the manual?
Details the Intellian i4 Inland as a satellite antenna system for inland marine use.
Details the individual parts that make up the antenna unit.
Provides specific guidelines for installing the antenna unit for maximum performance.
Advises confirming antenna dimensions and ensuring sufficient space for installation.
Provides the physical dimensions of the Antenna Control Unit (ACU).
Provides step-by-step instructions for mounting and connecting the ACU.
Explains the connection of the RF cable between the antenna and the ACU.
Illustrates the cable connections for a single satellite receiver setup.
Defines the LNB skew angle and when it needs adjustment for linear polarized satellites.
Provides step-by-step instructions for manually adjusting the LNB skew angle.
Lists the various operational functions covered in this section of the manual.
Identifies and describes the function of the ACU's soft keys.
Details the normal operating sequence and status indicators of the ACU.
Explains how to change the target satellite when using the Dual-Sat mode.
Details the process for changing the target satellite in the Advanced Tri-Sat mode.
Provides the initial steps to enter the ACU's setup mode.
Details the procedure for setting local frequency when using a single band LNB.
Briefly describes the capabilities of the Intellian PC Controller software.
Explains how to set GPS data and find antenna angles using the PC controller.
Describes methods for moving the antenna to target positions or by specific angles.
Explains how to interpret the results of the antenna's self-diagnosis test.
To Next Page
General
