12
Intellian Satellite TV Antenna Systems
Cables
Before installing the system cables, consider the following points.
• All cables need to be well clamped and protected from physical
damage and exposure to heat and humidity.
• Cables with severe bends are not allowed.
• Where a cable passes through an exposed bulkhead or deckhead,
a watertight grommet or swan neck tube should be used.
Power Requirements
You need to follow the power requirements to avoid damaging the
system.
• Intellian Inland comes with an AC Power Adapter designed to a boat’s
power supply rated from 110~220 V AC.
• If your Receiver(s) and television(s) require a 110V/240V AC power
supply, you will need to install a suitable DC to AC converter to operate
the units from your boat’s DC power supply.
Extending the cables
The cables that have been supplied with your Intellian system should be
of adequate length to complete the installation on most boats.
Power Adapter
The supplied power adapter supports a power supply rated from
110~220V AC.
RF Cable
This cable is supplied at a length of 15m. If a longer length is required
you should replace this cable with an extended RF cable supplied by
Intellian Technologies.
Note: Exceeding the indicated cable lengths will result in reduced
performance of your system.
To Next Page
Loading...
Need help?
General
