26
4.3 Installation of Primary Handset
The primary handset is provided with cradle. It can be mounted on a desktop,
bulkhead, top ceiling or under captain’s console as similar as the BDU.
The primary handset is to be separated from its cradle so that the cradle can be
xed with the M5 x 12mm self-tapping screws.
The procedure of the installing the cradle is simple as follow:
1. Separate the handset from the cradle and remove the plastic cover of the
cradle.
2. Position the the cradle on the mounting areas.
3. Fix the cradle with M5 x 12mm self-tapping screws, which are supplied.
4. Reattach the plastic cover onto the cradle.
5. Secure the handset onto the cradle.
Plastic Cover
Handset
Cradle
M5 x 12mm Screw
To Next Page
Loading...
