Intellian FB500 - Page 38

FB250/500 User Manual
38
7.2 Powering Up the Primary Handset
The Primary Handset is automatically powered up once it is connected to the
dedicated HANDSET port.
Depending on the conditions of the BDU, the Primary Handset may start in the
following modes:
Full functioning mode
In full functioning mode, there is no PIN authentication required to start using the
FBB system. All BDU settings including contacts, messages and call logs are
loaded into local memory of the Primary Handset once the BDU is congured.
You will be able to access all the menus and making voice or data calls once the
Primary Handset is ready.
PIN mode
User is required to enter the correct PIN/password before proceeding to Full func-
tioning mode, Refer
to Security settings menu for more information on the types of security PIN in the
BDU.
To enter the PIN:
1. Key in the PIN of the security key using the alpha-numeric keypad.
2. Press OK key* to conrm.
To cancel PIN entering:
1. Press the Right selection key*.
2. Conrm to start in Emergency only mode by pressing the OK key*.
Emergency only mode
PIN authentication is bypassed (i.e. when you have forgotten the required PIN).
You can only make emergency calls or access local Phone manager menu in this
mode.