Intellian FB500 - Page 52

FB250/500 User Manual
52
Adding / Editing proles
You can press the Left selection key* or OK key* from the option list to add new
or edit existing prole settings.
• Prole name
Specify the name of the prole.
• Connection type
Both Standard and Streaming connection types are supported.
• APN
Specify information of the APN (Access Point Name). Further available
settings are:
APN: Specify the Access Point Name for the connection. Default APN
is according to SIM card. Enter your own APN if you do not want to
use the default APN from the SIM card.
Username: Specify the user name for Static IP conguration.
Default is blank for Dynamic IP conguration.
Password: Specify the password for Static IP conguration. Default is
blank for Dynamic IP conguration.
You can press the Left selection key* for the following options:
o Edit
Edit the selected APN setting
o Fetch from SIM
Fetch the APN from the SIM card. This option is only available
when APN is highlighted.
• IP conguration
Contain options for Static or Dynamic IP. Default is Dynamic
IP conguration.
• IP address
Specify the IP address for Static IP conguration.
This eld is ignored for Dynamic IP conguration. Default is blank
for Dynamic IP conguration.
• Header comp.
Contain options to enable or disable header compression.
Default is Enabled.