Intellian FB500 - Page 54

FB250/500 User Manual
54
Note: You will be prompted to save the changed settings before exiting the sub menu.
Press Left selection key* or OK key* to save the changes.
Icon in the prole list indicates that the prole is not active and icon
indicates that the prole is currently active in use.
Status
Allow you to check the status of the data connection. You can also activate /
de-active a specic prole in the status display list.
Note: You will not be able to enter this sub menu if the BDU has not been registered for
PS data service.
The status list shows you the current active data connection. Depending on
whether there is an active connection, you can press the Left selection key* for
the following options:
• Activate Primary
This option is available when there is no active data connection.
Select this to choose from the prole list for activation.
• Deactivate
This option allows you to deactivate an active data connection.
To active a primary data connection when there is no active connection:
1. From the data status list, select Options using the Left selection key*.
2. Select Activate primary using Left selection key* or OK key*.
3. Select from a list of congured primary prole for activation.
Press Left selection key or OK key* to conrm.
4. You are prompted to conrm activation. Conrm activation by
selecting yes using the Left selection key or OK key*.
Note: It may take a while to active a data connection.