98
V. Port Forwarding
Port Forwarding is a feature for Router (multiple-user) mode.
This feature sets the FBB BDU to direct incoming trafc on certain TCP/UDP port
to a specic port on a local PC (IP Address).
Follow these steps to add a new forwarding rule:
1. Click the Add button.
2. Enter the Incoming Port number in the space provided.
(For example, the user expecting HTTP trafc, the port is 80).
3. Enter the Destination IP Address.
(For example, the IP Address of the PC that is connected to the FBB BDU).
4. Select the Protocol type TCP (e.g. for HTTP, it will be TCP) UDP.
5. Enter the Destination Port number in the space provided (For example: listening
port of the particular service (for example TCP port 80 for web server) on the PC
that is connected to the FBB BDU).
6. Click Apply to allow the settings to take effect.
To Next Page
Loading...
