This screen lets you congure the access control policy used within the
access point.
Select from the drop-down menu.
Disables the MAC address ltering function.
Only wireless adapters with a MAC address on the access
list can connect to the AP.
Wireless adapters with a MAC address on the access
list will be prevented from connecting to the AP.
This is the unique 12-digit hexadecimal identication for
hardware devices in the network.
Displays all the MAC address that have been added.
• Add the MAC address to the access list.
Delete the selected MAC address from the access list.
Remove all MAC addresses from the access list.
Click to apply the setting change(s).
28
So f t AP
MAC Table
To Next Page
Loading...
Need help?
General
