Intellinet 524438 - SoftAP Mode Configuration; SoftAP Basic Settings

one will be connected; if there’s nothing in the prole, the adapter will
connect to any unsecured wireless AP nearby.
 Delete the WPS-enabled access point from the list.
 To use the PIN-type WPS conguration option, enter the PIN code
and then click “PIN.”
To use the PBC-type WPS conguration option, put the WPS-
enabled access point in WPS – PBC mode, then click “PBC.”
so f t Ap
This adapter can run as a
wireless access point (AP).
Right-click the conguration
utility icon on the Windows
system tray and select
“Switch to AP Mode” to activate the SoftAP function.

This screen enables you to congure the AP connection setting, the
Country Region Code and other advanced functions.
 The SSID (up to 32 printable ASCII characters) is the unique
24
So f t AP