5
English Svenska Suomi Norsk
Start Box
Check that the following items
are in the Start Box:
• Inteno DG150
• Power adapter
• RJ45 Network cable WAN (Red)
(large contact)
• RJ45 Network cable LAN (Yellow)
(large contact)
• RJ11 DSL cable (Grey) (small contact)
• RJ11 Telephone cable (Green)
(small contact)
• DSL splitter (only included for
DSL customers)
Connecting the
DSL/telephone jack
It’s important to connect the broadband
service to the rst telephone jack in your
home. Otherwise you may get trouble with
your telephony service, as well as your
data service. In an apartment you’ll usually
nd the rst telephone jack close to the
entrance door. In a villa, the location of the
jack may be harder to detect, as you need
to nd out where the telephone cable
connects to the house. If you previously
have had a broadband service and it has
worked without troubles you’ll know that
you should install the modem in the same
telephone jack as before. If you haven’t
had a broadband service you’ll need to
localize the rst telephone jack.
Do as follows:
1. Shut down your computer.
2. Connect the DSL splitter adapter to the
rst telephone jack inside the house.
3. Connect the grey telephone cable
between the DSL splitter and the
DG150 (DSL).
Connecting the WAN/
broadband connection
Do as follows:
1. Shut down your computer.
2. Connect a RJ45 network WAN cable
between your broadband outlet
and the DG150 WAN port (WAN).
DG150
Multi WAN Residential Gateway
This installation guide will help you install the Inteno DG150. Your
service provider will supply you with information about log in and
access. DG150 can be connected to an ADSL network or to an
Ethernet based broadband network.
a
b
d
c
To Next Page
Loading...
