Intenza 450TI2S

7

Intenza Treadmills Handbook. 550Te2 Assembly Instructions

STEP 5

Installing the console bridge: connect the electrical connectors.

STEP 6

Installing the console bridge: connect the electrical connectors.

PLEASE NOTE

Ensure the 3 electrical connectors at the top of the left

upright post are well—connected before moving to the

next step.

. ... .... ..... ........... ..... ............... ..... ....... ..... ... ... . . ................... .

PLEASE NOTE

Ensure the TV coax cable, electrical connector,

ETHERNET cable and HDMI cable at the top of the

right upright post are well—connected before moving

to the next step.

. . ... . ... ........ ....... ... . ... ... . . ... ... ... . ... ....... ... . ... ... ... . ..... ... ..... ... ...

. . ... . ... .......

. ....... ... . ... ... . . ... ... ... . ... ....... ... . ... ... ... . ..... ... ..... ... ...

. . ... . ... ........ ....... ... . ... ... . . ... ... ... . ... ....... ... . ... ... ... . ..... ... ..... ... ...

PLEASE NOTE

When connecting the TV coax cable, be sure to tighten the

connectors, then push the jacket cover over the connectors.

. ... .... ..... ........... ..... ............... ..... ....... ..... ... ... . . ................... .

STEP 7

Installing the console bridge: TV coax cable connections.

STEP 8

Installing the console bridge: position the bridge on top of the upright posts.

PLEASE NOTE

Be sure to push any excess wires inside the right and left

upright posts.

. . ... . ... ........ ....... ... . ... ... . . ... ... ... . ... ....... ... . ... ... ... . ..... ... ..... ... ...

550Te2 Assembly Instructions

EN

Intenza 450TI2S - Page 8