Inter-m PA-2000 - Specifications; Amplifier Section Specifications

PA-2000/PA-4000/PA-2000R/PA-4000R Public Address Amplifier
Specifications
AMPLIFIER SECTION
Rated Output Power (THD 1%) PA-2000/PA-2000R: 60W (RMS)
PA-4000/PA-4000R: 120W (RMS)
Input Sensitivity/Impedance
CH 1~CH 6 0.25mV~80mV/600
Phono (CH6) 2mV/22K
Link In 100mV/15k
Telephone In 0.775V/600
Amp In 1V/47k
Frequency Response 60Hz–20kHz
T.H.D (at 1kHz Rated Output) Less than 0.5%
S/N 105dB
Graphic Equalizer
(100Hz, 330Hz, 1KHz, 3.3KHz, 10KHz) ±12dB
Speaker Output/Impedance 120W: 4, 8, 42 (70V), 83 (100V)
60W: 4, 8, 83 (70V), 165 (100V)
Link Out/Impedance 500mV/600
Music On Hold/Impedance (2000R/4000R only) 0.775V/600
Preamp Out/Impedance 1V/600
TUNER SECTION
Tuning Range FM: 87.5 – 108 MHz
AM: 522 – 1710 KHz
Antenna Input FM: 300, BAL or 75 UNBAL
Usable Sensitivity FM: 2µV
AM: 4µV
S/N FM: 65dB
AM: 50dB
GENERAL
Power Source AC 110V–240V, 50/60Hz
Power Consumption PA-2000/PA-2000R: 130W
PA-4000/PA-4000R: 230W
Weight PA-2000: 10kg (22 lbs.)
PA-4000: 12kg (26.4 lbs.)
Dimensions PA-2000: 420(W)x 100(H)x 320(D) mm
16.5(W) x 3.9 (H) x12.6 (D) in
PA-4000: 420(W)x 133(H)x 320(D) mm
16.5(W) x 5.2 (H) x12.6 (D) in
Specifications and design subject to change without notice for improvements.
17