47
Inter-Tel
®
Model 8520 User Guide
MOVING ON
Enabling Background Music
If your telephone system is equipped with a music source, you can listen to music
through your speaker.
To enable or disable background music:
Dial
.
Changing Keymaps
Keymaps identify where feature buttons appear on your endpoint. While all endpoints
are programmed with a standard keymap, some endpoints have alternate keymaps
(ask your system administrator). If you have an alternate keymap, you can switch
between the keymaps by dialing a specific feature code.
To switch between keymaps when your endpoint is idle:
With the handset in the cradle, dial
.
To switch between keymaps during a call:
Press and dial
.
Enabling Automatic Call Answer
The Automatic Call Answer feature determines whether or not you are automatically
connected to a caller when you lift the handset (or press ). If this feature is enabled,
you are automatically connected when you go off-hook. If it is disabled, you must
first lift the handset (or press ) and then press the flashing button.
To enable/disable this feature for ringing outside calls:
With the handset in the cradle, dial
.
To enable/disable this feature for ringing (non-handsfree) intercom calls:
With the handset in the cradle, dial
.
3
1
3
3 9 9
3 9 9
3 6 0
3 6
1
8520.book Page 47 Friday, December 2, 2005 2:59 PM
To Next Page
Loading...
