D-0121151-B – 2018/11
AD528 - Instructions for Use - EN Page 30
Interacoustics disclaims all other warranties, expressed or implied, including any warranty of merchantability
or for function of fitness for a particular purpose or application.
4.4 Calibration properties
General Information about specifications
Interacoustics continuously strives to improve its products and their performance. Therefore the
specifications can be subject to change without notice.
The performance and specifications of the instrument can only be guaranteed if it is subject to technical
maintenance at least once per year. This should be carried out by a workshop authorized by Interacoustics.
Interacoustics puts diagrams and service manuals at the disposal of authorized service companies.
Enquiries about representatives and products may be sent to:
Interacoustics A/S Phone: +45 63713555
Audiometer Allé 1 Fax: +45 63713522
5500 Middelfart E-mail: info@interacoustics.com
Denmark http: www.interacoustics.com
Minimum periodic calibration requirements:
Minimum calibration interval of once (annually) per 12-month period
Records of all calibrations should be kept on file.
Recalibration should be performed after:
1. A specified time period has elapsed (12-month period maximum, annually).
2. When an audiometer or transducer has had a shock, vibration, malfunction, or a repair or part
replacement has been performed which potentially may have put the audiometer out of calibration.
3. Whenever the user suspects patient results to be inaccurate.
Annual calibration
It is recommended that an annual calibration be performed by a trained technician/a skilled laboratory,
knowledgeable and up to date in the relevant requirements of ANSI/ASA and/or IEC and the device
specifications. The calibration procedure must validate all relevant performance requirements given in
ANSI/ASA and/or IEC.
To Next Page
Loading...
