15
o
Coil Nailer
Drives Plastic Sheet Nails (1¼" to 2½" / 32 to 65mm)
or Wire Weld Nails (1¾" to 2½" / 45 to 65mm)
Model No. CN565-15
Item No. 65555
19
Interchange Brands Operator’s Manual
PARTS KITS FOR CN565-15
ORDER NO. DESC. CODE KIT # ITEM
98520 CN565K1 Kit #1 O-Ring/Gasket/Bumper for CN565-15 (also fits SN5016)
98525 CN565K2 Kit #2 Piston/Driver Assembly/Bumper for CN565-15
98530 CN565K3 Kit #3 Head Cap Assembly for CN565-15 (also fits SN5016)
98535 CN565K4 Kit #4 Trigger Valve Assembly with Trigger for CN565-15
98540 CN565K5 Kit #5 Magazine Assembly for CN565-15
98545 CN565K6 Kit #6 Guide Body Assembly for CN565-15
98556 CN565K7 Kit #7 Safety Kit for CN565-15
98547 CN565K8 Kit #8 Feeder Kit for CN565-15
WARNING!
■ Always follow the tool manufacturer’s safety and
maintenance instructions.
■ Always wear safety glasses with side shields when
operating or servicing tools.
■ Always disconnect the air supply from the tool and empty
the magazine when servicing tools.
!
NOTICE: The parts listed in this manual are for service assembly and for reference.
Changes to the tool and drawing may be made without notification.
Most parts or parts kits are available. Contact your local dealer for more information.
WARNING: When the tool needs repairing or servicing, it is strongly recommended
that you contact your local dealer. Do not disassemble the tool yourself, which might
waive your right for product guarantee.
To Next Page
Loading...
