E-Mail: keiths@interfaceforce.com
Technical changes reserved
TS Series Reaction Torque.doc
Internet: www.interfaceforce.com
References in this Text
1.6 Warning Notes; Page 4
Attention must be paid to the accident prevention regulations of the trade associations.
During operation the safety precautions must be serviceable.
4 Mechanical Assembly; Page 6
Caution: During the assembly inadmissibly large forces may not act on the sensor or the
couplings. At small torques (< 20 N·m) connect the sensor electrically during the assembly
and observe the signal, the measurement signal may not exceed the limit values.
During the assembly, the sensor must be supported to protect it from falling down.
Caution at permutation of drive side and measuring side.
4.1 Sensors up to 15 N·m; Page 6
Sensors with nominal torques up to 15 N·m are very sensitive regarding overload;
therefore treat the sensors with great caution.
The warming-up period of the torque sensor is approx. 5 min.
6.4.2 Natural Resonance; Page 9
Operation of the device in natural resonance can lead to permanent damages.
To Next Page
Loading...
Need help?
General