Interlogix Advisor Advanced ATS1000A-MM - Page 100

90 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
3.2.n.2 User group type
2 UG type
>Normal user<
There are three types of user groups: Normal user, Installer, and Supervisor.
These types are provided to comply with EN 50131. User group type defines the
default user group options, as well as allowed changes.
Note: Only the Installer user group has type Installer. Also, this is only possible
type for this group.
Table 23 below denotes default and allowed user group options (user privileges).
Table 23: User group types and allowed options [1]
#
Option
User group
Normal
user
Supervisor
Installer
Guard
1.
Full set
Y (U)
Y (U)
Y
Y (U)
2.
Part set 1
N (U)
Y (U)
Y
Y (U)
3.
Part set 2
N (U)
N (U)
Y
Y (U)
4.
Unset
Y (U)
Y (U)
Y
Y (U)
5.
Inhibit
Y (U)
Y (U)
Y
Y (U)
6.
Isolate
N (U)
N (U)
[Y]
N (U)
7.
Time and date
N (U)
Y (U)
[Y]
Y (U)
8.
User adding (none / restricted / all)
N (U)
Y (U)
[Y]
N (U)
9.
Forced set
N (U)
Y (U)
Y
N (U)
10.
Change PIN
Y (U)
Y (U)
[Y]
Y (U)
11.
Walk test
N (U)
Y (U)
[Y]
Y (U)
12.
Engineer reset
N (U)
Y (U)
[Y]
Y (U)
13.
Duress code
N (U)
Y (U)
Y
Y (U)
14.
Reporting test
N (U)
Y (U)
[Y]
N (U)
15.
Remote connection
N (U)
Y (U)
[Y]
N (U)
16.
Cleaner
Y (U)
Y (U)
N (U)
17.
UG area list
Y (U)
Y (U)
[Y]
Y (U)
18.
Menu access
Y (U)
Y (U)
[Y]
Y (U)
19.
Inst. access
N (U)
Y (U)
N (U)
20.
Logs access
N (U)
Y (U)
[Y]
Y (U)
21.
Stop report
N (U)
N (U)
N (U)
22.
SMS reporting
N (U)
Y (U)
Y
N (U)
23.
SMS control
N (U)
Y (U)
Y
N (U)
24.
Card and PIN mode
Y (U)
Y (U)
Y
Y (U)
25.
No OP/CL reports
N (U)
Y (U)
N (U)
26.
Door access
1 to 16 (U)
1 to 16 (U)
1 to 16 (U)